Raidmax Smilodon Mid Tower ATX case review

My video review of the Raidmax Smilodon Mid Tower ATX PC. It has green and does not come with a power supply. There are also Smilodon that comes with various feeds, you can get with blue LEDs, but the case is still exactly like that. I have not spoken in this review that the side Plexiglas also a place for a 80mm fan on the cpu area to install. I'm not a fan just to install, instead I built a plastic tunnel over the top of my Core2Duo CPULet the heat sink, sucking fresh air directly, as recommended on the Intel site. Overall I'm quite happy with this case, gets many compliments. There are three really nice green LED on the front line and the side fan is also a green LED fan. All fans are quiet. The side-opening door and coming off a great feature for easy cleaning of your computer every month or so to prevent overheating, very important for a system of play. My only twosticky issues in this matter is that although the door is nice, open when I connect the USB cable, headphone jack, using a microphone or DVD on the front, or on the computer. Just a minor annoyance at times. And secondly, I would like the hard disks have been painted black to match the case, would look better.

My Links : Buy Cheap Anti Virus 2010 | LOWER Prices XBOX 360 Hardware Store Save! Comet Electrical

PS3 60GB Sharing with the voice and also in flames, with chicken (YLOD)

This is all my old parts of the PS3 until you guys what its like inside a PS3 now that you can subscribe to the rate and the remarks of the problem with the PS3 that im in the month to obtain a yellow light when I turn in this usually is caused by CPU or GPU to lose contact with the motherboard GPU in my case, has no contact with the motherboard as I do not it? I do not, because I looked down and saw through the pin, but no contact with the GPU, the CPU looks good so far .....How am I gona do? im gona buy a liquid solder flux is liquid flowing under the GPU and I'm gona use in a 420 degrés heatgun fareign height, so you can solder the GPU and all the dissolution fluid flow can be attached together by welding is actually the same league, so I'm gona warming, when the liquid alloy and in this way for about a minute until it starts to boil like crazy, then the CPU in this case are gona do both in the case, always the2 of them this may not last long, but it would take a couple of months and when it does repeat the process is not difficult to remove only do this if it's too late WARRANTIES AND NOT RESPONSIBLE FOR ANY DAMAGE TO PRESENT IM U!! !! thanks for watching subscribe rate and comment !!!!!=) PS3 PS3 PS3 heatsink fan heat sink on the motherboard (CPU Cell Broadband Engine GPU RSX) touchpad buttons PS3 PS3 (PSU) of the paper and PS3 wireless PS3 bluetooth...

Friends Link : Switch Hub Store. LOWER Prices in The Same Item Webcam Store. LOWER Prices in The Same Item Buy Cheap Bluetooth Headset | LOWER Prices

How to build your own computer

Build your computer from individual parts will begin with getting a motherboard, RAM, CPU and hard disk.

The motherboard is the part of every computer that connects the CPU is actually what makes your computer a computer, RAM is where you work on your computer does everything, and the hard disk where data is stored. You also need a video card, and will be a network interface card (or a wireless network adapter) will, and if you need a sound cardhas no sound onboard the motherboard. You also need a monitor, keyboard and mouse, and if you want a case for it and some fans. Suppose we have all the parts, and were smart enough to make a bundle to buy a place like NewEgg.com, where someone else has chosen the RAM CPU and motherboard, so all work together. (For computers that are "last generation" stuff, this is often a good way to get a really cheap computer for a small sum of money.)

OK,you go to a screwdriver, a need for good light and a magnifying glass does not hurt. Following the instructions for your case and motherboard, install the motherboard into the case. Connect the power supply wires to the motherboard, and attach all connections to the front plate and back plate. Power up - there are LEDs that light up, if not, you may need to talk to whoever sold you the motherboard.

Now, power down again. Set your CPUin the CPU socket, it can be difficult - but not forced. Everything should line up and you will get in. Now, practice the heatsink / fan on the motherboard, then remove it, apply some 'thermal grease on top of the CPU tries to put on a uniform and put on the heatsink. Usually there is a spring tension locking lever to keep using it. The main cause of death, forcing the CPU and motherboards in the first motherboardfolder and a pen, and tries to run without the cooling block.

Once the CPU, put the RAM in the slots, and connect the hard drives. Make sure when you buy the hard disks that use the same connectors on the motherboard (which is why we take the motherboard and work our way out). SATA hard drives are faster, bigger and easier to find than the old IDE. SATA vs IDE is a good reason to choose a hard disk onothers. Most hard drive bays are lives in media so you can mount the hard drives there. If your hard drives are equipped with fans, the fans are connected. Hard drives can be very hot, and it is not good for them.

Now, put the video card, the monitor, and switch - you should do a test "POST", identifying the CPU and how much RAM you have, and with luck, will tell you that found hard disk drives. Otherwise, you may need to lookthe motherboard manual again and play with some jumpers.

Finally, close all other parts where they should go, including the CD-ROM. You need the CD-ROM to install Windows or Ubuntu Linux. Leave the case open while installing the operating system, just in case something needs to be adjusted.

You're on your way to building your own computer.

Visit : Brass Tube

PC Motherboard Computer Problems

Motherboard is an important part of the computer, play a vital role in the computer. If the card and the computer problems will affect the entire work of the PC system. Here we look at the most common mistakes made when we use our computer motherboard.

Error 1: Do not Showboat

computer starts up no display, we need to check the BIOS. BIOS and the hardware store important data of the BIOS is the most vulnerable part of the motherboard can easily be damaged ifdamage the system does not work cause. This error is usually because the BIOS of the motherboard damaged by the CIH virus (of course not rule out the motherboard failure resulting system can not work himself). In general, after the virus has destroyed the BIOS hard drive data will be lost. So we can detect the hard drive data to determine if the property is damaged BIOS. If the hard disk data intact, so there are three reasons why there is a phenomenon Showboat:

1. Why the expansion slot on the motherboard orboard is not responding problems expansion card to show when the plug-in expansion card, such as sound cards, etc.

2. CPU frequency settings in the CMOS jumper free motherboard is not good, can also cause a debt no-show. In this context, bug to be resolved until the CMOS clear. Clear CMOS jumper near the General Council of the lithium battery. 1.2 The default position is usually short, quick jump to 2.3 just change a few seconds you can solvethe problem. If users can not find the jumper tab from historical precedent, to remove the battery, enter the CMOS settings for display and boot, install the battery has reached the goals CMOS battery.

3. Motherboard does not recognize ', corruption of memory or memory does not match, so no fault Showboat. Some of the oldest form of selective memory, when connected to the memory that the motherboard does not recognize your motherboard does not start, andSome motherboards do not even give you an error tips (tweet). Sometimes, of course, memory expansion to improve the system to shut down several brands, types of memory can also lead to such an error, so care should pay more attention.

If the BIOS of the motherboard is damaged, you can connect ISA to see if the display (if required, may suggest this procedure.) If the startup screen, you can automatically update the BIOS floppy disk, BIOS innovate, butSome BIOS is damaged, the floppy drive does not work, then try to use the hot plug method to solve (until I tried the same BIOS, the motherboard in the same class may be writing this). But the use of hot-plug addition to the BIOS the same need may damage some devices on board, so a reliable method is to use a code writing device to write the file to update the BIOS in the BIOS.

Error 2: CMOS settings can not be saved
such failures are usually due toInsufficient battery voltage of motherboards, which can be replaced with the problem, but some motherboards can not be the same problem after replacing the battery, there are two possibilities:

1. the problems of the circuit board that they need to look for professional services;

2. Motherboard CMOS jumper problem, sometimes due to correctly set the CMOS jumper on the motherboard clear choice, or set up an external battery and the CMOS data can not be saved.

Error 3:Windows after installing the motherboard drivers CD-ROM, because the phenomenon of collapse or slow reading discs.

In some non-branded motherboards can sometimes such a phenomenon. After you install the motherboard drivers, reboot the computer can not enter the Windows 98 desktop, and that the driver in Windows 98 can not be removed. If this happens, you may want to re-find the latest drivers and installed, the problem can be solved in general, if not, can only reinstallsystem ..

Error 4: When you install Windows or restart the Windows mouse is not available

This failure of the software is generally caused by the CMOS settings wrong. power settings in CMOS has a modem to use IRQ project, its options were ... 3,4,5, NA, in general, is the default option 3 is set at 3 parts of escape.

Error 5: frequent computer crashes, freezes during the CMOS settings.

Phenomenon has occurred due to accidents in CMOS,usually the problem with CPU or motherboard, not the next method is not resolved, you can only replace the motherboard or CPU.

This failure is due to the edge of the general problems of heat cache or bad design of the motherboard, I found, because of the cooling is not sufficient in non-815EP mainboard in the phenomenon. After the death of touching the motherboard components around the CPU, and found that the temperature is very hot. Afterreplacing the high-powered fans, can crash disorders. cache problem for failure, we are able to enter the CMOS settings, you can be successful after the ban of cache, of course, the prohibition certainly affect the speed cache.

Error 6: on board COM port or parallel port, an IDE port is not

This failure is usually due to user's hardware hot-plug. Currently the user can use the multifunction card to be replaced. But before that substitution is necessary to prohibit the COM port and parallel portmotherboard (some motherboards with IDE ports are banned for proper use).

Related : Crucial 2GB 667 Store. Vehicles Hybrid

My step into the real world cool baptized Aboriginal Education

My build ===== i7 920 (step D0) Corsair H50-EX58-EXTREME GIGABYTE Dominator XMS3 Corsair TR3X6G1600C7D 6GB DDR3-896I Gigabyte GV-N26OC GeForce GTX 260 WD RE3 250G Corsair Corsair 850HX power supply 800D Linksys WUSB600N ver.2 Microsoft LifeCam Cinema ==== 20X200MHz OC 4.0GHz CPU voltage: 1.29V (littble a bit 'higher, because I saw a guy reach 4.0GHz 1.2652V) CPU PLL: 1.80V Mem: 1.50V Temp (Real Temp) === = Core CPU Idle: ~ 41c Core 100% CPU load: ~ 80C (more than I expected, thisacceptable) Temp (Everest Ultimate Ed) ==== North Bridge.:?. ~ 48 c (give me some tips and products to choose water cooling, because of) Time (in EasyTune6) ==== CPU Idle:! 35C ~ 100% CPU load: ~ 56c I received my Corsair 800D event this Wednesday and after setting up all my hardware in this case I started with some overclocking fortunitely big job to do and I achieved my step 4.0GHz i7 920 D0. What a powerful motherboard, and it's so easy for me (I'm fairly new to c) toi7 overclock my 920! But I also appreciated the high quality that Corsair has given me the CPU watercooling H50 (a little 'noob, but very useful!), 7-year-old justified 850W PSU, DDR3 Dominator C7d trple mode in this great thing 800D really great. Reeaaaaly now I'm enjoying my building! Update # 1 OC is vCore voltage, CPU: 1.2652V to keep all the money that I have a stable 4.0GHz overclock to get idle temp @ temp ~ 33c ~ 56c full load. Update # 2 November 22 OC is CPUvCore ...

Tags : Blu-Ray Players Store

Toasted Skin Syndrome Explained

recent headlines have brought to light a condition called "toasted skin syndrome" - and do not get the Sun Many of today toasted patients with syndrome of skin are computer users who perch a laptop on his knees for long periods.

The syndrome of skin roast, medically known as erythema ab igne is caused by prolonged exposure to heat is not hot enough to cause burns, about 43 to 47 degrees Celsius, but it can affect the skin. It looks like astained red or brown rash with damage similar to that of prolonged exposure to sunlight

Although laptop to use a common risk for skin toasted modern syndrome, the illness for a long time. Skin discoloration of this type is usually associated with sitting too close to a fire or excessive use of heating pads.

Safe to use laptop skin to prevent the syndrome of toasted

Precautions can be taken to avoid the syndrome of roast skin when you use a laptop, so herea number of important things to consider:

• Make use of time. It 's easy to be with your laptop and think that you only use for a few minutes, only to find yourself still working an hour later. It 's a good idea to take regular breaks, not just your skin can cool off, but to improve circulation to the limbs and back or shoulder problems.

• Be aware of the temperature. By the time you begin to feel laphot, the laptop had already been too long.

• Use a heat shield between laptop, desktop or laptop and your lap, especially for long sessions. This prevents the warmer parts of the laptop in direct contact with skin.

• Keep your laptop well ventilated. Suddenly she sits on her knees, your laptop could overheat or fabric to pull its vents. Consider the removal of the jets with compressed air from the timetime for your laptop running cooler.

• Setting up a workstation - you need a laptop as your primary computer for work or study, creating a good work area with ergonomic chair mentality, keyboard and screen. This ensures that the power remains in the womb and that your position is a minimal strain on your body.

If you bought a new laptop or a laptop rental, safe operation ensures a longer life of equipment - and a better lifestyle foryou.

Visit : DiggReview The Site To Review Interesting Products Security Film Zoom H2 Handy Portable Sterio Recorder Best Price

Corsair 800D:: EVGA X58 classified in action! i7 920 2.66 GHz to 4.0 GHz from 19 to 21C act!

DO show i7 920 2.66 GHz to 4.0 GHz SOLID! demonstrate the software via CPU ID .. and the idle temperature is running in the first 19C to 21 C and thats all the remains 18W version DDC sure to do the job well done! killer hot copper and 3.0 works very well for this cooling systems ...

Thanks To : Buy Cheap Network Security Books | LOWER Prices Rock Auto Review