Thanks To : Wireless Fence Harddisk Store Buy Cheap TurboTax | LOWER Prices
Wednesday, December 1, 2010
Gigabyte P35-DQ6 motherboard
Thursday, October 28, 2010
PC Motherboard Computer Problems
Motherboard is an important part of the computer, play a vital role in the computer. If the card and the computer problems will affect the entire work of the PC system. Here we look at the most common mistakes made when we use our computer motherboard.
Error 1: Do not Showboat
computer starts up no display, we need to check the BIOS. BIOS and the hardware store important data of the BIOS is the most vulnerable part of the motherboard can easily be damaged ifdamage the system does not work cause. This error is usually because the BIOS of the motherboard damaged by the CIH virus (of course not rule out the motherboard failure resulting system can not work himself). In general, after the virus has destroyed the BIOS hard drive data will be lost. So we can detect the hard drive data to determine if the property is damaged BIOS. If the hard disk data intact, so there are three reasons why there is a phenomenon Showboat:
1. Why the expansion slot on the motherboard orboard is not responding problems expansion card to show when the plug-in expansion card, such as sound cards, etc.
2. CPU frequency settings in the CMOS jumper free motherboard is not good, can also cause a debt no-show. In this context, bug to be resolved until the CMOS clear. Clear CMOS jumper near the General Council of the lithium battery. 1.2 The default position is usually short, quick jump to 2.3 just change a few seconds you can solvethe problem. If users can not find the jumper tab from historical precedent, to remove the battery, enter the CMOS settings for display and boot, install the battery has reached the goals CMOS battery.
3. Motherboard does not recognize ', corruption of memory or memory does not match, so no fault Showboat. Some of the oldest form of selective memory, when connected to the memory that the motherboard does not recognize your motherboard does not start, andSome motherboards do not even give you an error tips (tweet). Sometimes, of course, memory expansion to improve the system to shut down several brands, types of memory can also lead to such an error, so care should pay more attention.
If the BIOS of the motherboard is damaged, you can connect ISA to see if the display (if required, may suggest this procedure.) If the startup screen, you can automatically update the BIOS floppy disk, BIOS innovate, butSome BIOS is damaged, the floppy drive does not work, then try to use the hot plug method to solve (until I tried the same BIOS, the motherboard in the same class may be writing this). But the use of hot-plug addition to the BIOS the same need may damage some devices on board, so a reliable method is to use a code writing device to write the file to update the BIOS in the BIOS.
Error 2: CMOS settings can not be saved
such failures are usually due toInsufficient battery voltage of motherboards, which can be replaced with the problem, but some motherboards can not be the same problem after replacing the battery, there are two possibilities:
1. the problems of the circuit board that they need to look for professional services;
2. Motherboard CMOS jumper problem, sometimes due to correctly set the CMOS jumper on the motherboard clear choice, or set up an external battery and the CMOS data can not be saved.
Error 3:Windows after installing the motherboard drivers CD-ROM, because the phenomenon of collapse or slow reading discs.
In some non-branded motherboards can sometimes such a phenomenon. After you install the motherboard drivers, reboot the computer can not enter the Windows 98 desktop, and that the driver in Windows 98 can not be removed. If this happens, you may want to re-find the latest drivers and installed, the problem can be solved in general, if not, can only reinstallsystem ..
Error 4: When you install Windows or restart the Windows mouse is not available
This failure of the software is generally caused by the CMOS settings wrong. power settings in CMOS has a modem to use IRQ project, its options were ... 3,4,5, NA, in general, is the default option 3 is set at 3 parts of escape.
Error 5: frequent computer crashes, freezes during the CMOS settings.
Phenomenon has occurred due to accidents in CMOS,usually the problem with CPU or motherboard, not the next method is not resolved, you can only replace the motherboard or CPU.
This failure is due to the edge of the general problems of heat cache or bad design of the motherboard, I found, because of the cooling is not sufficient in non-815EP mainboard in the phenomenon. After the death of touching the motherboard components around the CPU, and found that the temperature is very hot. Afterreplacing the high-powered fans, can crash disorders. cache problem for failure, we are able to enter the CMOS settings, you can be successful after the ban of cache, of course, the prohibition certainly affect the speed cache.
Error 6: on board COM port or parallel port, an IDE port is not
This failure is usually due to user's hardware hot-plug. Currently the user can use the multifunction card to be replaced. But before that substitution is necessary to prohibit the COM port and parallel portmotherboard (some motherboards with IDE ports are banned for proper use).
Related : Crucial 2GB 667 Store. Vehicles Hybrid
Saturday, September 25, 2010
Tips for a good motherboard Select
Choosing motherboard is very simple. As the name suggests "Motherboard" acts as a protective mother of CPU, RAM and other cards to be added, as
components stand firmly on motherboard.
Number of devices are integrated on the motherboard
in a period of time. Now, a week with the features of the motherboard board is more popular in the PC brand. On board integrated peripherals are offered by many PC manufacturers brand
you the latest technology as yousystem
a large computer manufacturer recently.
It is advisable to select the motherboard with a maximum
number of ports preferably 2 serial, 1 parallel
and four USB ports. Most USB devices recently
port. Also check the options as Upgradation
memory support and the number of PCI slots available, etc.
Technology changes so rapidly that manufacturers add
New features such as Serial ATA, USB 2.0 and RAID
on the motherboard before the staycompetition.
Many manufacturers also offers FM radio on
motherboard to survive in the race makes it completely
entertainment machine.
Motherboard Important Tips:
1) Has the inquiry by reading reviews
motherboards, and then search is the same motherboard
or compare with its competitors in the product
market.
2) Do not buy the motherboard more expensive if you do not
go to additional functions. Always check the cost of
effectiveness andmake your selection with the simple evaluation
in use.
3) If you are dedicated player or fan of overclocking,
if the CPU is enough space around
Installation of a larger heat sink-fan combination
for cooling. Go to the motherboard, which is the
Facility overclocking FSB in steps of 1 MHz and core
Voltage regulation.
4) Verify that the motherboard chipset
compatible with the processor speed andspeed
the FSB. It 'very important to verify
compatibility with the system to improve.
5) Select feature of the motherboard for future full of new
gradation. Also make sure that sufficient and PCI
memory slots for future expansion.
6) When planning to go for expensive motherboard
motherboard chipset with onboard video and AGP
slot. Do not forget to check AGP slot supports
transfer rate last year.
7) See if mother boardsound and
Ethernet.
8) Check the type of memory that your motherboard supports.
9) DDR RAM is the most popular option today. More
motherboards have at least two slots. But expensive
motherboards have 4 slots. The total amount of RAM
The installation may also depend on the motherboard
chipset.
10) The transfer of data without errors is
main function of the chipset. This function
the chipset decides the overall performancethe
system. This is why the speed of a processor
The chipset supports is very important. In the case of
Future updates should only change
processor. This saves time and money.
Monday, September 6, 2010
EVGA P55 Classified 200 Motherboard
My Links : Rosetta Stone Store LOWER Prices in The Same Item Electro Harmonix Muff