PC Motherboard Computer Problems

Motherboard is an important part of the computer, play a vital role in the computer. If the card and the computer problems will affect the entire work of the PC system. Here we look at the most common mistakes made when we use our computer motherboard.

Error 1: Do not Showboat

computer starts up no display, we need to check the BIOS. BIOS and the hardware store important data of the BIOS is the most vulnerable part of the motherboard can easily be damaged ifdamage the system does not work cause. This error is usually because the BIOS of the motherboard damaged by the CIH virus (of course not rule out the motherboard failure resulting system can not work himself). In general, after the virus has destroyed the BIOS hard drive data will be lost. So we can detect the hard drive data to determine if the property is damaged BIOS. If the hard disk data intact, so there are three reasons why there is a phenomenon Showboat:

1. Why the expansion slot on the motherboard orboard is not responding problems expansion card to show when the plug-in expansion card, such as sound cards, etc.

2. CPU frequency settings in the CMOS jumper free motherboard is not good, can also cause a debt no-show. In this context, bug to be resolved until the CMOS clear. Clear CMOS jumper near the General Council of the lithium battery. 1.2 The default position is usually short, quick jump to 2.3 just change a few seconds you can solvethe problem. If users can not find the jumper tab from historical precedent, to remove the battery, enter the CMOS settings for display and boot, install the battery has reached the goals CMOS battery.

3. Motherboard does not recognize ', corruption of memory or memory does not match, so no fault Showboat. Some of the oldest form of selective memory, when connected to the memory that the motherboard does not recognize your motherboard does not start, andSome motherboards do not even give you an error tips (tweet). Sometimes, of course, memory expansion to improve the system to shut down several brands, types of memory can also lead to such an error, so care should pay more attention.

If the BIOS of the motherboard is damaged, you can connect ISA to see if the display (if required, may suggest this procedure.) If the startup screen, you can automatically update the BIOS floppy disk, BIOS innovate, butSome BIOS is damaged, the floppy drive does not work, then try to use the hot plug method to solve (until I tried the same BIOS, the motherboard in the same class may be writing this). But the use of hot-plug addition to the BIOS the same need may damage some devices on board, so a reliable method is to use a code writing device to write the file to update the BIOS in the BIOS.

Error 2: CMOS settings can not be saved
such failures are usually due toInsufficient battery voltage of motherboards, which can be replaced with the problem, but some motherboards can not be the same problem after replacing the battery, there are two possibilities:

1. the problems of the circuit board that they need to look for professional services;

2. Motherboard CMOS jumper problem, sometimes due to correctly set the CMOS jumper on the motherboard clear choice, or set up an external battery and the CMOS data can not be saved.

Error 3:Windows after installing the motherboard drivers CD-ROM, because the phenomenon of collapse or slow reading discs.

In some non-branded motherboards can sometimes such a phenomenon. After you install the motherboard drivers, reboot the computer can not enter the Windows 98 desktop, and that the driver in Windows 98 can not be removed. If this happens, you may want to re-find the latest drivers and installed, the problem can be solved in general, if not, can only reinstallsystem ..

Error 4: When you install Windows or restart the Windows mouse is not available

This failure of the software is generally caused by the CMOS settings wrong. power settings in CMOS has a modem to use IRQ project, its options were ... 3,4,5, NA, in general, is the default option 3 is set at 3 parts of escape.

Error 5: frequent computer crashes, freezes during the CMOS settings.

Phenomenon has occurred due to accidents in CMOS,usually the problem with CPU or motherboard, not the next method is not resolved, you can only replace the motherboard or CPU.

This failure is due to the edge of the general problems of heat cache or bad design of the motherboard, I found, because of the cooling is not sufficient in non-815EP mainboard in the phenomenon. After the death of touching the motherboard components around the CPU, and found that the temperature is very hot. Afterreplacing the high-powered fans, can crash disorders. cache problem for failure, we are able to enter the CMOS settings, you can be successful after the ban of cache, of course, the prohibition certainly affect the speed cache.

Error 6: on board COM port or parallel port, an IDE port is not

This failure is usually due to user's hardware hot-plug. Currently the user can use the multifunction card to be replaced. But before that substitution is necessary to prohibit the COM port and parallel portmotherboard (some motherboards with IDE ports are banned for proper use).

Related : Crucial 2GB 667 Store. Vehicles Hybrid