Showing posts with label Maintenance. Show all posts
Showing posts with label Maintenance. Show all posts

Sunday, November 28, 2010

Software & PC Maintenance Tips

PC Most owners think their computers are disposable. If the system fails, it is replaced by a newer (more expensive) model. There are many programs you can use for your system in tune, but we must first discuss some basic things you can do to the life of your computer system to expand.

The worst heat of a computer! Heat can cause parts to wear out much faster ...

Basic Computer Maintenance:
The first thingyou should check if your computer has adequate ventilation. Check to see if there is anything that can block the air and out of the system. The space around your system will run cooler. Some offices have a computer cabinet in place in your computer, if you have a desk like that, that's what you can do to help ventilation. In the back of the box, cut around the holes where the PSU (power supply) fan is positioned so that the boy will be ableoutside the cabinet, also cut holes where at least fans can be positioned so that they can vent outside the case even in the room. In some cases, simply cutting a big hole in the back of the cabinet, will help with ventilation. If a door, leave the door open while the computer's operating system so that the system can draw cool fresh air into the case. If the door is closed, the air alone can bring the computer where the heated air is released fromcase.

Monitor Maintenance:
Second, make sure that the monitor is equipped with space around it so it can heat released outside of the case. Never block took a monitor, LCD monitors also release a lot of heat. Keep breathing!

Maintenance Computer Case
The third thing you can do to your computer is intended to extend inside the computer case clean.
The dust, the worst computer afterthing. The powder acts as a cover for the components. Keeps components releasing heat, which can lead to overheating of the components. Even a light layer of dust on your components can cause up to 5% more heat, as in the system. Before the next step, make sure that this does not invalidate the warranty. Make sure your computer is off first. Open the computer case or a screwdriver, or simply turning the screws to open (some systems). Make sure that the soil Before touching any internal parts. Your body can carry static electricity, and can be removed by touching all the parts that could damage the components. Do you have something in your business to the next section do not touch. Start vacuum all the dust you can from your business, take care not to damage while doing so. Subsequently, the compressed air can buy from Wal-Mart, or an electronics store, and bladder all crevaces, CPU> Heat sinks and fan / s, component heat sinks and fans, including video cards, sound cards, etc.. Once done with that, blow the dust from your case as best you can. After you let the dust settle down, blow the case again. This can of air will help clean the keyboard and mouse too. Vacuum first, and then blow the rest. With regular cleaning, you can add years to life on your keyboard and mouse. WhileIf you have opened, the next step.

Hard Drive Maintenance:
First, his hard drive designed to work horizontally, not vertically! Using the hard drive vertically, can lead to premature bearing wear. With the vertical drive, not even the weight of the disc, and moving parts, as well as horizontal scrolling, there is an equal weight. Hard drives can quickly wear out if not properly installed. If your hard drive is mounted vertically, to see if they can bemounted in any other place where wiring will reach a good place in a CD / DVD Drive / s and a floppy disk, hard disk locations. Try moving the stations where they will be flat. May need to CD / DVD drive to move it to work. They sell some kits that the hard drive to fit in a 5 1 / 4 drive bay will fit.

If you have a case designed for a case fan / s, what! Usually cost about $ 10 and could add years to your lifecomputer. They will help your computer run much cooler.

Remember that your computer room for ventilation and keep it clean inside, and will be around for the next year ...

Using a good software for PC maintenance can help the system to work more and have less problems.

Thanks To : Intel Core i7 920 2.66GHz Store DiggReview The Site To Review Interesting Products Sony VAIO VGN-FW465J Store

Wednesday, September 15, 2010

Computer Maintenance - Improve Computer Performance and Reliability With a Cooler Computer

Many people these days are beginning to think of their computers as disposable. When their computer crashes, many times because of heat, they are on the fence about whether to fix it or trash it and buy a new computer. But understanding what makes a computer break before its time, will arm you with the knowledge to add years to the life of your computer. So wouldn't it make more sense to plan for the retirement of your trusty old computer rather than being forced to buy a new one because of an unexpected failure?

Simple Things You Can Do To Keep Your Computer Cooler

The greatest threat to computers (and electronics in general) is heat. Heat not only lowers the performance of your system, but it can cause electronic components to fail prematurely resulting in hardware failure. With that said, the first thing to check is the ventilation around your computer. Most standard computer desks have an enclosed compartment or cabinet for you to cook your computer in. If you must place your computer in an enclosed space, cut a hole in the back of the cabinet behind the exhaust ports of the computer. You should also ensure that your computer is at least 4 inches from the rear of the cabinet.

If you still have an older CRT monitor, make sure that you don't get tempted to use the top for a shelf which might block ventilation slots in the top of the monitor case. A heat issue with a CRT monitor can cause color shifting, flicker, and even total failure over time. Even an LCD Monitor has ventilation slots that shouldn't be blocked either. The next thing you can do almost always gets neglected, and this is to clean the dust from the interior surfaces of your computer. I recommend you clean the interior of your desktop computer twice a year. As for your monitor, and especially if it is a CRT model, I absolutely don't recommend that you attempt to open it up. CRTs have high-voltage circuits inside and should only be serviced by a qualified technician.

While dust might seem to be a superficial housekeeping issue to some, it can contribute to heat issues by acting as a blanket. Not only that, but some dust might be corrosive or might even conduct electricity which can lead to short circuits. If enough dust settles on the CPU heat sink, the dust will restrict airflow through the heat sink fins which is needed to take away the enormous heat generated by the CPU. And if too much dust accumulates on the CPU Fan blades, the weight of the dust can unbalance the blades and cause premature failure of the fan itself...this goes for any fan.

The easiest way to clean the inside of your system is to use a vacuum cleaner and hose (an antistatic vacuum if you have one). I also use a brush to knock down the dust and finish it off with a can of compressed air. Note: Always turn-off and also UNPLUG your computer before cleaning the inside. Also, if you don't know about ESD, at least touch a door knob and then an external metal part of your computer case before touching any components inside your computer. This will help to discharge any static electricity in your body.

I also recommend cleaning the cooling fan blades as well if they are accessible. I go as far as using Q-tips, although you might find it hard to clean the power supply fan unless you disassemble it, and I wouldn't recommend that unless you are qualified to service electrical parts. Warning: Power Supply capacitors can shock you even when the power is off and it is unplugged unless they have been properly discharged.

While you have your computer open, and especially if you ever had it upgraded with a 2nd hard drive or an add-on video card, check to ensure these add-on parts were installed with adequate clearance from other adjacent parts. I recently repaired a computer that someone had installed an add-on Video and USB Card next to each other. They were so close that the fan on the video card was being blocked by the USB Card, which caused the fan motor to burn out prematurely.

Although not a heat issue, you might as well use the canned air to clean your keyboard as well. Vacuum it first, and then blow it out with the canned air. I suggest you get a keyboard skin or cover to protect it from liquid spills and small foreign objects such as paper-clips.

While most people would agree that keeping your computer clean and cool sounds like common sense, it just gets neglected until their computer fails and you end up paying a PC Technician to do it for you as part of an untimely but preventable repair. Hopefully, I was able to nudge a few to take a look at their computer and take a few easy steps towards a cleaner, cooler, and more reliable computer.

Visit : Blu-Ray Movies Store. LOWER Prices in Same Item Printers Store. LOWER Prices in The Same Item, Let

Sunday, September 5, 2010

Daily Computer Maintenance - Tips You Should Know to Optimize Pc Performance

As we all know that, computers are the same as human beings which need to be taken care of. If so, it will always work at the maximum optimization status and extent the lifespan. On the contrary, firstly, this will some serous problems appearing like some important data lost improvably, computer crashes every two or three days, or unable to complete the scheduled work; secondly, this will significantly shorten the lifespan of the computer. So we can say that daily computer maintenance is necessary in order to optimize PC performance.

Normally, computer maintenance contains two parts: hardware and software maintenance.

Hardware maintenance means that it is needed to do some jobs like cleaning dust. After being used for sometime, the computer may get dusty inside for the fan that pulls hot air outsides are always pulling in air, which laden with tiny particles of dust. When these particles cling to electronics, they act like a blanket to hold in heat. And the dusts always stay at the biggest heat producers like CPU, heatsink, and video card. So a cleaning dust is necessary regularly in order to maintain the PC performance. If possible, please keep the area around your computer as dust-free as possible.

Software maintenance, including protecting the computer from being attached by virus, and regularly deleting the unnecessary system junk files, running a disk defragment is necessary in optimizing PC performance. Here, there is no need to talk about the importance of the anti-virus program to the computer for it is known to all that it is a must in order to protect the computer, but instead, we will particularly discuss the parts that always be neglected by lots of PC users when maintaining the computer: junk files cleanup and disk defragmentation.

When using the computer it is inevitably for us to surf websites and download programs, which always bring some useless temporary file on the computer. They do nothing but harm to the computer. So it is necessary for us to clean up the system junk files in a regular basic.

Besides, a disk defragmentation is indispensable in daily computer maintenance for it will rearrange the contents on the hard disk in order to making a complete file always stays at the same single place coherently and contiguously, Hence it will be much easier to get access to when trying to input or output it. Therefore, the computer may always run at faster speed and also extent the lifespan of the hard disk and the computer.

Visit : Standard Error Formula